Got a new lower hose on order
Issue with collapsing hose has been suggested
and I had this issue even before I
added the BE Bonnet. Planning on changing
out lower hose as well as retarding
timing 1 or 2 degrees and see if that
helps. If that doesn't work then Metro
Radiator. With the BE Bonnet and Oil
Cooler mounted in front of the radiator not
getting all of the air flow
possible but the fact that around town is all ok
leads me to suspect I
really might have an issue with a collapsing hose. Bugsy
is a 1098 with a
cross flow radiator so plumbing is a little bit of an issue.
________________________________
From: derf <derf247 at gmail.com>
To: Billy Zoom
<billyzoom at billyzoom.com>
Cc: James Gruber <thistle_3619 at yahoo.com>;
kmappley at gmail.com; Spridgets Digest
<spridgets at autox.team.net>
Sent: Sat,
June 4, 2011 4:10:37 PM
Subject: Re: [Spridgets] Metro Radiator
If you get
good air flow at lower speeds you should get good flow at 65.
On Sat, Jun 4,
2011 at 1:25 PM, Billy Zoom <billyzoom at billyzoom.com> wrote:
>> Fine around
town but at 60-65 +
>> sustained temps climb
> Are you sure your bottom hose
is firm? (no jokes please)
|