spridgets
[Top] [All Lists]

Re: [Spridgets] Double wall bulk head in Sprite.

To: Pete Chast <pchast@francomm.com>, <spridgets@autox.team.net>
Subject: Re: [Spridgets] Double wall bulk head in Sprite.
From: Billy Zoom <billyzoom@billyzoom.com>
Date: Mon, 06 Jun 2011 13:26:17 -0700
> Look for Pop Rivet Nuts. The 1/4 inch size is plenty strong
But use steel Riv-Nuts rather than aluminum, and use a good installation
tool...at least the ratcheting one. I don't care for the regular HF types
that look like pop riveters. They don't squeeze the steel Riv-Nuts enough to
keep them tight. 
BZ
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>