<< With a big hammer and a punch I couldn't knock one of the
pistons out. >>
Er WHAT-EVER-THE-F***-YOUR NAME-IS, did you remove the ridge ??
Put the pan back on with 3 - 4 bolts, sit motor upright on said pan and out
an ounce or two [2] diesel OIL in the 4 holes and let sit for a few days.
THEN try - with 2 x 4 knocking the pistons DOWN - NOT up. Couple more
ounces in each hole. Er WAIT !! Are ALL four [4] rods DIS-connected ??
Dat's step FIRST !! THEN the pan & sit upright.
AFTER first "knock-em" loose try, turn motor upside-down and try
knocking pistons UP. Return pan to motor, turn upright & re-diesel oil
again. KEEP repeating until all are loose. <VBG> !!
Would be faster with a couple cans of "Busty" but I don't know if it's
even available in what ever area you live in. I CAN and do ship the stuff,
right Frank <G> !!
Ed
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|