Re: [Spridgets] "A" Arms

["Jim F." <jimndi@frontiernet.net>]

thanks guys.

Used the Hot Wrench and they came right out.
  ----- Original Message -----
  From: Chris King
  To: jimndi@frontiernet.net
  Cc: spridgets@autox.team.net
  Sent: Monday, July 27, 2009 3:48 PM
  Subject: Re: [Spridgets] "A" Arms


  If they're seized, best bet is probably a sawzall. Bushings should probably
be replaced anyway.

  -=Chris

  Chris King
  http://home.comcast.net/~kvcbk/

   <-----Original Message----->

            From: Jim F. [jimndi@frontiernet.net]
        Sent: 7/27/2009 2:02:42 PM
        To: spridgets@autox.team.net
        Subject: [Spridgets] "A" Arms

        I'm having difficulty removing the Fulcrum Pins that attach the front
lower A
        Arms to the BE shell. Is there a trick to this I don't want to use the
hot
        wrench because of the rubber.
        _______________________________________________
        Support Team.Net http://www.team.net/donate.html

        You are subscribed as cbking@alum.rpi.edu

        http://www.team.net/archive

        http://autox.team.net/mailman/listinfo/spridgets
        .




-----------------------------------------------------------------------------
-



  No virus found in this incoming message.
  Checked by AVG - www.avg.com
  Version: 8.5.392 / Virus Database: 270.13.32/2266 - Release Date: 07/27/09
05:58:00
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets