If they're seized, best bet is probably a sawzall. Bushings should
probably be replaced anyway.
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
From: Jim F. [jimndi@frontiernet.net]
Sent: 7/27/2009 2:02:42 PM
To: spridgets@autox.team.net
Subject: [Spridgets] "A" Arms
I'm having difficulty removing the Fulcrum Pins that attach the front
lower A
Arms to the BE shell. Is there a trick to this I don't want to use the
hot
wrench because of the rubber.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
You are subscribed as cbking@alum.rpi.edu
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|