So how do I duplicate that same thing for my 2 extra front tenax posts right
at the front of the top by the doors. Normally velcro is used in that area.
http://www.gerardsgarage.com/Garage/Tech/topWS.htm
Here's how I did it (above - check the author too!) I just used a razor
knife to make the holes. Another lister suggested using a wood burning tool
or soldering iron to melt a hole in the fabric. Either will work as the
tenax fastener will cover the spot anyway.
--
Kent
1960 Bugeye
1967 Sprite - following in the 73's footsteps to the boneyard...
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|