Frank,
Yea I see that 950 on the side of my block, did they also put a plate on the
top like the 1098 & 1275?
Lin
On Thu, Apr 9, 2009 at 10:53 PM, Frank <spritenut@comcast.net> wrote:
> jjj@acsnet.com wrote:
>
>> Asked this on the BCF and am getting nowhere. Hopefully the learned group
>> can help. I have an engine that I recieved with a bunch of parts that
>> seems good but have'nt a clue as to what it is. Its had all tags removed.
>> It has covers over the lifter gallery so I imagine it is a 1098. Any way
>> to tell without a teardown whether it is a 10CG or 10CC or whatever??
>>
>>
> 948s have 950 embossed in the block near the rear of the motor under the
> carbs.
> 1098s had a tag near the front of the motor, carb side as did 1275s.
> But no 1275 came with side covers.
> I think the later 1098s had an oil separator can on the front side cover,
> early ones had a draft tube.
>
> --
> Frank Clarici
> Toms River, NJ
> My own Fleet of Sprites
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as grunthaner@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|