Paul Asgeirsson wrote:
> Hi John,
>
> I use a 1 7/8" wrench on the lock nut. Fits perfectly. Make sure you have
> the locking washer tab pounded back out of the way so the wrench will fit
> over the nut. Nuts sorta thin!
>
> They are "handed" nuts on some cars so watch that. It isn't always a case
> of twist left for taking it off!
>
>
Paul!
Welcome back.
Like Paul said, 1-7/8" socket fits but in a pinch a hammer and dull
chisel will loosen the nuts.
1 is a left hand thread.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|