in rear in front
MC MC
|________|____ Out to front left hand side via the end plug & copper
washer
| |
out to out to
rear front right hand side
Thanks for the idea Chris.
The shuttle switch is located in the one that comes out towards you
Mark,
Do you need the continuation pages? If so I'll send them on.
GRD
----- Original Message -----
From: "Chris King" <cbking@alum.rpi.edu>
To: <haynes386@netzero.net>
Cc: <spridgets@autox.team.net>
Sent: Saturday, September 15, 2007 1:49 PM
Subject: Re: [Spridgets] Brake Proportioning Valve Connections
> Mark,
>
> If you look at your PDWA (Pressure Differential Warning Activator) like
> this:
>
> |__|_
> | |
>
> The left hand connections go to the rear brakes, and the right hand
> connections (all 3) go to the front brakes. Top Left is Rear brakes from
> the MC, bottom left is the line that runs to the rear axle. Top right is
> the the front brakes from the MC, and the other two lines go to the left
> and right front wheels.
>
> This doesn't to any proportioning. Rather, there's a shuttle inside that
> senses if there's a loss in pressure in either the front or the rear
> brakes, and if so lights a light on the dash to tell you it's time to
> change your undershorts!
>
> HTH
>
> -=Chris
> Chris King
> http://home.comcast.net/~kvcbk/
>
> <-----Original Message----->
>
> From: M [haynes386@netzero.net]
> Sent: 9/14/2007 11:19:32 AM
> To: spridgets@autox.team.net
> Subject: [Spridgets] Brake Proportioning Valve Connections
>
> Oh most learned ones,
> I've been upgrading the brakes on my '62 to include not only the front
> discs,
> but the dual line master cylinder form the '67 on Sprites. I've got the
> proportioning valve and the lines, but am unsure as to which line goes
> where
> on the master, and which go to the front brakes. There are 5 ports, two
> of
> which are larger in thread size than the rest- these two go to the
> master. The
> question comes from these two ports being opposed (across the piston) to
> one
> another. Does the proportioning valve work side to side (rather than end
> to
> end)? That makes no sense to me. Can anyone solve my dilemma?
>
> Mark Haynes
> '62 AN6L17792-without brakes!!!
> _____________________________________________________________
> _______________________________________________
> grday@btinternet.com
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|