Another silent mounting for a Facet, is to use an MGB transmission
mount, whose 2 ear holes line up to the pump, and it has 1 stud on
the other side of the rubber block that is easily mounted.
Peter C
==
At 09:35 AM 6/8/2007, Brad Fornal wrote:
>Generally, it is the Facet, or something similar, that runs
>constantly. Marc, if you will cut a square of rubber, and mount it
>between the pump and the bulkhead, you should be able to lessen the
>noise to a somewhat acceptable level.
>Derf, I replaced the Facet on the 68, with an SU off of the 65 BBQ'd
>Sprite. It still thumps, but about 3 or 4 pulses every 2 to 3 seconds.
>What I was always curious about, is when I go to start any of my cars,
>the SU will thump for 5 - 10 seconds, before it slows down and stops.
>I don't see any visible leakage on the carbs (stock SU's), so where
>does all the darn fuel go?
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|