Hi.
Is the nut off the car? Screw it onto a bolt until you find the correct size,
you must have a box of nuts/bolt/washers you've accumulated over the years. If
not go to a good hardware store and try it.
It's probably about 1/2x20 I would guess.
A thread file will work to fix up the threads, again a good hardware store will
have one. Be careful with a die or you can end up cutting new threads, a
re-threading die is better, but harder to come by than the thread file.
Good luck,
John
-------------- Original message --------------
From: "Gregory Groiss" <ggroiss@gmail.com>
> OK, maybe It's just me and I missed or misread an email in this thread
> along the way but did anyone address the first part of Jack's
> question?
|