Frank,
I believe you may be looking at the wrong system. The water may be flowing
fine, but if the oil pressure goes to zero, it will overheat.
Oil circulation "cools" the engine as well.
Check the pressure side - oil pump, relief, etc.
Hope this helps.
----- Original Message -----
> then just switch on the key, the temp reads normal at the sender.
> As long as it's not running. fFire it up and instant "H" and no oil
> pressure. (new oil too)
> You can stick your finger in the rad for a few seconds, no boil over,
> fan is pshing thru the rad as it does on a Mini.
|