Re: rear wheel gear oil leak?

Hi Mike,

It's not real hard to do, but you will need a really big socket.  The whole 
brake assembly has to come off.  Including the back plate.  Pull the axle too.  
The nut is on the inside of the axle hub assembly.  Bend the tab back and 
loosen the large nut.  It should fall out in your hands.  It is just  a simple 
lip seal.  Check for wear patterns on the axle hub.  There was a groove in mine 
on the top side of the axle housing.  I used a speedy sleeve to fix it.

good luck

cheers

ww Ricky