In a message dated 5/22/03 10:26:40 PM Eastern Daylight Time,
cbking@alum.rpi.edu writes:
> Got the pistons out of my calipers. I noticed that between the two seals
> there is some rust on the bores. Can I lightly sand/buff this out, or are
>they
> toast and I should use them as cores for the Napa $53 calipers?
- - - - - - - - - -
Sand it out. As long as it isn't pitted deeply, you should be OK. I used
crocus cloth. Any fine emery paper should work.
Allen Hefner
Phila. Region SCCA Rally Steward
'77 MG Midget (#51 FSP)
'75 MG Midget (The Project)
'99 Ford Contour SE Sport (24v V6)
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|