Robert,
Do the throttles have those little spring loaded "buttons" on them? If
so, they could be "leaking". I cut them off and solder up the holes.
(Makes for a better idle).
Kevin V.
Robert Sexson wrote:
>I need a little advice on a carb adjustment. Valves
>and timing are correct. The engine will idle smouth
>but will start backfireing out the carb at about 3000
>RPM. If i increace the mixture it will reach higher
>RPM but won't idle right. Any suggestions? This is a
>1275 in a 74 Midget.
>
>R Sexson
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|