Robert Duquette wrote:
> I got the engine gearbox combo out this morning and that's probably as far
> as I will get today. While I had the engine up a bit and was trying vainly
> to pull it forward, I kept thinking "Frank says this is the easiest way,
> this is darn difficult." Then I removed the other two bolts that hold the
> gearbox mount in, and all went well.
You got lucky, at least those bolts can take it.
Normally the forgotten connection is the clutch hose, or
the reverse light wiring on the tranny, or something that
gets irrevocably damaged during the pull.
--
Trevor Boicey, P. Eng.
Ottawa, Canada, tboicey@brit.ca
ICQ #17432933 http://www.brit.ca/~tboicey/
Waiting for Guffman.
|