FWIW, are most folks on the list aware that Kar offers a crimp-on bullet
connector that works in our harness
perfectly? These would be good for adding a stereo, aux. lights, etc. I was not
aware of this until adding an
oogah horn a couple of weeks ago and found these in the maintenance shop. Now I
can pull this thing out and not
have a butchered harness to show for it. I had previously been using lengths of
wire from old harness', splicing
the connectors into the appropriate areas.
Bill L wrote:
> Hello chuck,
>
> there IS another way.. or a couple of the actually besides
> getting out the copper coat or the DE-OX...
>
> you could use wire nuts.. easilly available.. but ugly.. lumpy.
> .. but a good connection.. the other is to get "spade"
> connectors..
|