Tommy,
The easiest way is to buy a stud extractor. This looks like a
socket, but has several cams inside that lock onto the stud. hey come in
different size with little latitude for diameter. They work great. Another
method is threading 2 nuts on the stud, then jamming them tight against
each other and with an open end wrench unscrewing the bottom one, closest
to the head. Liberal applications of intense heat helps too. I recommend
MAPP gas for your propane torch.
Good luck. Peter C
====
At 01:34 PM 8/3/2001, you wrote:
>Well last night while putting it back together I broke one of the exhaust
>manifold studs.
>There is about 5/8 inch left sticking out of head.
>Is there an easy way to extract this.
>I loaded it up with penetrating oil last night before I quit
|