...I realize it's my Spitfire they went in first...
but a complete photo expose' of installation
and runner info etc was just posted to my site.
...a work in process.....
the feet I cut the pin off...left it 'as a rivet
(see photos)
www.teglerizer.com/triumphstuff/miataseats/
I hammered the feet somewhat) flat, parallel to
the runners smashed down the feet a bit as well
A dremel tool makes it so easy if you need to trim.
Large fender washers everywhere
Paul Tegler ptegler@gouldfo.com www.teglerizer.com
----- Original Message -----
From "Bob Drake" <rdrake at bfree.on.ca>
To: "Spridgets" <spridgets@autox.team.net>
Sent: Monday, July 30, 2001 11:16 AM
Subject: Rugs and Miata Seats
Hi Folks
I'm currently putting a '74 Midget back together.
I've got this lovely new rug set but the car had virtually no intact rugs
for me to use as a guide. Mostly I've figured it out but ... Where do the
sound-deadening pads go?
Second question. The seats were beat. I got a pair of Miata seats from the
local wrecker. Now for those who have done this...did you remove the two
pointy pieces at the front of the rails? If so, did you then straighten the
front ends of the rails so they lie flat?
Thanks
Bob
|