Hello Paul,
Thursday, July 26, 2001, 1:19:10 PM, you wrote:
PAA> Hi Bill,
PAA> There may be other problems but I would suspect right off that you have
too much
PAA> fuel pressure with that pump. It should be the one that has a range of
1.5 to 4
PAA> lbs. pressure.
One post said 2.5 to 3 PSI and Paul says 1.5 to 4 PSI. I used my
Crapsman pressure and vacuum gauge and the fuel pump puts out about
3.75 PSI. Is that in range or a bit too high? If the gauge is off by
10% the range could be from 3.375 to 4.125 PSI. What do yah think?
If the pressure is to high who makes a good small pressure regulator. I
remember the ones when I was a kid, they were made by Purolator and
they were big and had a dial to set the pressure. Anyone found
anything better for a Spridget?
Maybe some junk getting past the fuel filter and causing the floats to
stick?
--
Best regards,
Bill mailto:w.gilroy@verizon.net
|