Re: Diff fluid, et al.

True David,
But in my case I already have it laying around from my model airplane days. 
scrap bits of all sizes in the junk box.



>In a message dated 12/15/2000 6:32:43 PM Eastern Standard Time, 
>grbyrns@ucdavis.edu writes:
>
><< A few well chosen pieces of brass tubing from the K&S metals rack, with the
> inside edge sharpened by the twist of an exacto blade gives you a good dirt
> cheap set of hole punches >>
>
>Or you could go by your local Big Lots/Odd Lots and pick up a set of real 
>punches for no more than the tubing would cost you. . .probably less.
>
>--DAvid C.
>
>
Regards,
Glen Byrns
'59 Bugeye