Re: Diff fluid, et al.

In a message dated 12/15/2000 6:32:43 PM Eastern Standard Time, 
grbyrns@ucdavis.edu writes:

<< A few well chosen pieces of brass tubing from the K&S metals rack, with the
 inside edge sharpened by the twist of an exacto blade gives you a good dirt
 cheap set of hole punches >>

Or you could go by your local Big Lots/Odd Lots and pick up a set of real 
punches for no more than the tubing would cost you. . .probably less.

--DAvid C.