Re: Lower Fulcrum pin removal?

At 04:38 PM 5/5/2000 , DLancer7676@cs.com wrote:
>What Peter said, but at the suggestion of a lister, I ground a #8 Bolt down 
>till it was a good tap fit into the screw slot in the fulcrum, then I was 
>able to use a socket---gave me a tremendously increased amount of leverage.  
>Still wasn't easy.
>--David C.

What David said, and most cold chisels will accept sockets, unless you've
already used the chisel as a chisel.
        Peter C.