Re: Lower Fulcrum pin removal?

In a message dated 5/5/2000 5:31:11 PM Eastern Daylight Time, 
nosimport@mailbag.com writes:

<< Once that is out you
 can commence to getting frustrated taking out the trunion with the
 screwdriver. Then you'll use a sawzall. >>

What Peter said, but at the suggestion of a lister, I ground a #8 Bolt down 
till it was a good tap fit into the screw slot in the fulcrum, then I was 
able to use a socket---gave me a tremendously increased amount of leverage.  
Still wasn't easy.

--David C.