Pardon?
Robert D.
-----Original Message-----
From Guy Weller <guy at weller-lakes.freeserve.co.uk>
>I tried that, and it works, but my nuts kep dropping out.
>I definately need a longer rod
>Guy
>
>----- Original Message -----
>From: Larry & Sandi Miller <millerls@ado13.com>
> You can make the rod as long as needed. You could also try Frank's method
>of
>> placing a nut behind the rod in the cylinder.
>>
>> LM
>>
>> ----- Original Message -----
>> From: "wizardz" <wizardz@maxinter.net>
>> To: <spridgets@autox.team.net>; <mgs@autox.team.net>
>> Sent: Thursday, March 02, 2000 9:05 AM
>> Subject: clutch pin length
>>
>>
>> > There are two different lengths of pins from the clutch slave cyl
>> > to the fork rod for the 948/1098 vs the 1275.
>> >
>> > Does anyone know how much different in length they are?
>> >
>> > I am beginning to suspect I have a pin that is too short forcing my
>> > slave cyl. to be near the end of its bore just to get the
>> > clutch engaged.
>> >
>> > A new clutch, fork and pivot bearing, throwout bearing, slave cyl.
>> > and it still seems like I don't have enough throw to the cyl.
>> >
>> > Can I swap one length pin for the other?
>> >
>> >
>> > Paul Tegler wizardz@toad.net http://www.teglerizer.com
>> > OBie - '73 BGT - daily driver
>> > http://www.teglerizer.com/mgstuff/ob_description.htm
>> > Punkin' - '78 Spitfire - corner ripping screamer
>> > http://www.teglerizer.com/triumphstuff/spit78.htm
>> > Lil' Greenee - '73 RWA Midget - lady killer
>> > http://www.teglerizer.com/midgetstuff/index.html
>> >
>> >
>>
>>
>>
>
>
>
|