Paul
I have found over the years that it is not uncommon to require a different
length rod, either shorter or longer, after changing the other components.
LM
----- Original Message -----
From <wizardz at toad.net>
To: "Michael Grint" <mgrint@Sympatico.ca>; "spridgets"
<spridgets@autox.team.net>
Sent: Thursday, March 02, 2000 8:02 PM
Subject: Re: Clutch Pin
> Well I've come to find the following concerning
> the pin lengths avail. that will fit.
> --- = info to come
>
> AH MG 948 / 1098cc 2.5" long
> MG 1275cc 3.0" long
> MG 1500cc 3.25" long
> MG MGB (late) 2.75" long
>
> ...was at a local LBC parts store today...
> picked up a few goodies....
>
> while chatting with the counter guy...
> he offered me up the 2.5" pin as the one I needed.
>
> HHHmmmm.. is this a common CATALOG ERROR
> (like the 1" LOWERED SPRINGS)
> the books were offering up the wrong length pin
> for this model year.
>
> So now I wonder.... is this my problem to begin with?
> is this what happened to the DPO? I'll have to look at it
> this weekend.
>
> thanks again all.
>
> Paul Tegler wizardz@toad.net http://www.teglerizer.com
> OBie - '73 BGT - daily driver
> http://www.teglerizer.com/mgstuff/ob_description.htm
> Punkin' - '78 Spitfire - corner ripping screamer
> http://www.teglerizer.com/triumphstuff/spit78.htm
> Lil' Greenee - '73 RWA Midget - lady killer
> http://www.teglerizer.com/midgetstuff/index.html
>
> -----Original Message-----
> From: Michael Grint <mgrint@Sympatico.ca>
> To: spridgets <spridgets@autox.team.net>
> Date: Thursday, March 02, 2000 8:52 PM
> Subject: Clutch Pin
>
>
> >I had the same problem with the clutch on my Sprite. I put in the longer
> >pin and it works just fine. The longer pin is about a quarter inch
> >longer.
> > Mikey
> >
>
>
|