If you don't have a breather pipe coming off your rocker cover
going to a carbon canister, and the PCV is being installed
between your timing chain cover oil separator and the top of the intake
manifold, I believe you should be using a vented cap.
If you have the rocker cover pipe going to a carbon canister
you probably also had the timing chain cover plate plumbing
going directly to a Y adapter and plugged into the sides of the carbs.
you should be using a non-vented cap.
-----Original Message-----
From Larry & Sandi Miller <millerls at ado13.com>
To: spridgets@autox.team.net <spridgets@autox.team.net>
Date: Sunday, January 23, 2000 9:44 PM
Subject: PCV
>I'm installing a PCV on the 1275 this week.
>
>Should I use a vented or non-vented cap?
>
>Larry Miller
>
>
>
>
>
|