Hi Bryan,
Is there any chance the 1275 that your LCB came off of was a Mini Cooper?
Kate
Bryan Vandiver wrote:
> Greg,
>
> I installed one of these on the 1275 in my bugeye. The only way I could get it
> on with the engine in place is with the head off. If you don't want to remove
> the head, you can try unbolting all the engine, and transmission mounts , and
> tilt the engine to the right, but it will probably end up taking as much if
>not
> more time than just removing the head.
>
> Good luck.
>
> Bryan Vandiver (59-bugeye)
> San Jose, CA
>
> >To: "Spridgets List" <spridgets@autox.team.net>
> >Subject: Installation help with Maniflow header
> >MIME-Version: 1.0 charset="iso-8859-1"
> >X-Priority: 3 (Normal)
> >X-MSMail-Priority: Normal
> >X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211
> >Importance: Normal
> >
> >Hello fellow listers,
> >
> >I need to ask for a bit of assistance on the installation of the Maniflow
> >LCB Exhaust header. How the @#*#%* do you install the thing? I can fit in
> >backwards, but that doesn't do any good. When I try and place it in the
> >correct way, it seems to keep hitting the area around the brake cylinder,
> >and can't get the bottom of the header through the space behind the wheel.
> >Any tips are appreciated!
> >
> >Greg Gowins
> >'69 Sprite
> >Dublin, CA
> >
|