Mine is mounted that way, but it is not the stock linkage. I have the Winner's
Circle bar. It requires custom holes in the A-arms.
Phil Vanner
'61 Midget (any holes inthe a-arms is a departure from originality)
-----Original Message-----
From: Guy [SMTP:Guy@weller-lakes.freeserve.co.uk]
Sent: Monday, June 14, 1999 12:54 PM
To: Ulix Goettsch
Cc: Spridget List (E-mail)
Subject: Re: Sway Bar mountings
I'm sure that I have seen a square bdy sprite with the anti-roll bar mounted
"up-side-down" - that is with the short link arms pointing upwards from
their mounting brackets on the lower wishbone plate.
This would increase ground clearance
Not tried it, but it would be an easy thing to do.
Anyone done that ?
Guy
>
|