Hmmmm, looks like I've had my carb springs connected up the wrong way for
the last few years. Never could understand why there needed to be a
spring on the choke. Now I know why.... there shouldn't be.
It's amazing what you can learn from this list, even when you're not
looking.
Cheers,
Eriks skinkis
Frank Clarici wrote:
> 3 car springs, 1 on the center linkage cam and 1 on each throttle
> linkage.
> The choke goes thru the brass fitting on the front side of the rear
> carb.
> It uses a cable end/fitting to secure it to the choke lever.
>
> For initial carb settings try 2 1/2 turns down, (15 flats of the nut)
> --
> Frank Clarici
> Toms River, NJ
> Bugeye Sprite
> 67 Sprite
> 59 A40
> http://www.exit109.com/~spritenut/
|