Profili wrote:
>
> List members,
>
> I have been putting together my 66 Sprite from a box of
> bits, so it's sometimes difficult to determine exactly where
> everything goes.
>
> The latest problem I have is the location of the return
> springs for the carbs. Does the centre one go to the large
> 'cam' on the throttle linkage, with the two outer ones going
> to the jet linkages? If this is correct, where does the
> choke cable go?
>
> Also, any suggestions for the initial setting up of the
> carbs?
3 car springs, 1 on the center linkage cam and 1 on each throttle
linkage.
The choke goes thru the brass fitting on the front side of the rear
carb.
It uses a cable end/fitting to secure it to the choke lever.
For initial carb settings try 2 1/2 turns down, (15 flats of the nut)
--
Frank Clarici
Toms River, NJ
Bugeye Sprite
67 Sprite
59 A40
http://www.exit109.com/~spritenut/
|