Well, you are both right. They go through the brackets for the tonneau
bar, at least on later cars...
UIix
On Thu, 28 Jan 1999 hello39@idt.net wrote:
> Scott,
> Those threaded rods slide thru the conv frame mounts and are drawn
> tight with a wingnut or washer and nut, I think
> Alan
>
> Scott & Glenda Meyers wrote:
>
> > I have a 1960 Bugeye with a hardtop. It has two flexible front
> > snaps that attach to the windshield, and two threaded rods
> > running down from the back sides, just in front of the side
> > window opening (right behind the door opening).
> >
> > That's all that cam with it.
> >
> > What am I missing? It seems that these two rods should fit into
> > some bracket that would attach inside the car, and then tighten
> > down with a nut......?
> >
> > Thanks for any info.
> >
> > Scott Meyers
> > 60 Bugeye 1275
> > In does rain in Phoenix a few times each year ;-)
>
>
>
Ulix __/__,__ ___/__|\__
..............................................(_o____o_)....<_O_____O_/...
'67 Sprite '74 X1/9
|