Re: need to know before painting

["Biff Jones" <biffjones@erols.com>]

Daniel,

I went out and looked at my MKII (61 production) and if I
followed Georges discription correctly, he said fairly thick font
and rear with a thin coat up and over the arch at the rear.  I
still have one original front fender and it has undercoating only
at the rear of the arch and most of it is on the outer edge of
the well where the seam is. The inner rear has none to just a
little.  This is only goes up the rear edge of the wheel well
about 10-11".

Hope this helps some.

Biff, AN5, 'Kermit' & HAN6, 'Ole Gray'
-----Original Message-----