Ron,
the 67 has a steering column only used for about 2 years, I think.
1 5/16" is indeed the size of the nut.
Thanks, Ulix
On Mon, 21 Sep 1998, Ron Soave wrote:
> >From my recent recollection, on my 61 the crank is 1 5/16, wheel hub 1
> 1/16. Maybe '67 is different. I gently used a gear puller. It popped right
> off.
>
> ----------
> > From: Ulix Goettsch
> >
> > Jason,
> > it's the same size as the crankshaft nut, if you really need to know I
> can
> > look it up.
> > Remove the column shroud, then you can hammer against the back of the
> > wheel with a hammer and punch to remove it.
> > Leave the nut on a couple of turns to keep the wheel in the car when it
> > comes loose.
> > Ulix
> >
> >
> >
> > On Mon, 21 Sep 1998, Jason Urban wrote:
> >
> > > Hi!!!
> > >
> > > Well, I finally got around to taking the 'extra' Sprite apart
> yesterday.
> > > It's a '67 - anybody looking for anything??
> > >
> > > Anyway, how do you go about removing the steering wheel?? What size
> socket
> > > and remover is used??
> > >
> > > Thanks!
> > > Jason.
> > >
> > >
> > > | Jason Urban - APOGEE LABS 215-699-2060 |
> > > | CA Studio www.dynanet.com/~crackerarts |
> > > | '95 Z/28 6spd '65&'67 Austin-Healey Sprites |
> > >
> >
> > Ulix __/__,__
>
> > .......................................................... (_o____o_)....
> > '67 Sprite
> >
>
Ulix __/__,__
.......................................................... (_o____o_)....
'67 Sprite
|