Re: 80 Spit pushrod question

spitfires

Re: 80 Spit pushrod question

To:	"Dave Willner" <dwillner@icontech.com>,
Subject:	Re: 80 Spit pushrod question
From:	"Larry Vaughan" <lvaughan@pldi.net>
Date:	Sat, 21 Dec 2002 14:42:06 -0600

The pushrod is connected to the clutch actuator arm, which has a pivot pin
on the opposite side. The pushrod would be resting on the exit hole in the
bellhousing. Any excess movement could mean the pivot pin fell out.
Larry

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
80 Spit pushrod question, Dave Willner Re: 80 Spit pushrod question, Jim Muller Re: 80 Spit pushrod question, ptegler@cablespeed Re: 80 Spit pushrod question, Greg Rowe Re: 80 Spit pushrod question, Dave Willner Re: 80 Spit pushrod question, Larry Vaughan <= Re: 80 Spit pushrod question, Jeff McNeal Re: 80 Spit pushrod question, Greg Schluge Re: 80 Spit pushrod question, Dave Willner

Previous by Date:	Re: 80 Spit pushrod question, Dave Willner
Next by Date:	Re: 80 Spit pushrod question, Jeff McNeal
Previous by Thread:	Re: 80 Spit pushrod question, Dave Willner
Next by Thread:	Re: 80 Spit pushrod question, Jeff McNeal
Indexes:	[Date] [Thread] [Top] [All Lists]