I visually checked them but did not take a wrench to 'em. Do I need to do
that?
At 10:54 AM 10/27/98 -0500, Dave Chu wrote:
>
>
>In message <3.0.5.16.19981027110832.42df76b8@jak10.med.navy.mil>you write:
>>OK, I checked out my U-joints this weekend and could not find any play in
>>them. Maybe I was checking the wrong thing. I could not find any
>>looseness in the U-joints, but I did turn the driveshaft by hand and it
>>would rock about an 1/8th of a turn and I could hear it clunk. What is
>>going on here, is my Differential causing the problem. The most noticeable
>>sign is a single pop when accelerating or shifting up under acceleration.
>>Patrick Bowen
>
> Patrick, have you check to see if all the nuts and bolts between the
> drive-shaft and the flange are not loose?
>
>Dave |\ | | |
>_______________________________________/\ /\ /\_____| \|_____|
|____________
>Dave Chu \/ \/ | /| | |
>Dept. of Elec. & Comp. Eng. |/ | | |
>Concordia University Voice:(514)848-3115 Fax:(514)848-2802
>1455 de Maisonneuve W. H915 Email:dave@ece.concordia.ca
>Montreal, Quebec, Canada H3G 1M8 http://www.ece.concordia.ca/~dave/addr.html
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
>
>
>
Patrick Bowen
'79 Spitfire
Jacksonville FL
|