shotimes
[Top] [All Lists]

Re: [Shotimes] Parts Interchangeability

To: shotimes@autox.team.net
Subject: Re: [Shotimes] Parts Interchangeability
From: Kenneth Epperly <epperly1@optonline.net>
Date: Wed, 02 Aug 2006 10:51:39 -0400
I would rule out smart as they knew it in 89 but probably was not cost 
effective to change the production stamping till the model redesign.

        Ken
  ----- Original Message ----- 
  From: G Kerby Haltom 
  To: Kenneth Epperly ; shotimes@autox.team.net 
  Sent: Wednesday, August 02, 2006 10:36 AM
  Subject: Re: [Shotimes] Parts Interchangeability


  I don't think the Gen IIs had that problem.  Ford got smarter about that 
stuff as time went on...

  Kerby

  Kenneth Epperly <epperly1@optonline.net> wrote:
    To use the Sable hood I think that you will need the under hood bracing 
from 
    the SHO to clear the intake & DIS. I know on the Gen 1 the hood strut mount 
    will hit the DIS unless it is bent away and then the strut will not work.

    Ken
    ----- Original Message ----- 
    From: "G Kerby Haltom" 
    To: "Brad Corradi" ; 
    Sent: Wednesday, August 02, 2006 8:35 AM
    Subject: Re: [Shotimes] Parts Interchangeability


    > Headlights are Sable units. I think the marker lights are, as well. But 
    > not the little "fillers", commonly refered to as fishtanks, next to the 
    > headlights. Those are SHO specific.
    >
    > 2) I believe that piece is the same for all Tauri and Sables.
    >
    > 3) Hood is a Sable piece
    >
    > 4) I forget, but is probably Sable as well.
    >
    > I don't have a Gen II, so somebody with a Gen II will chime in. But most 
    > parts are either stock Taurus or Sable.
    >
    > Kerby
    >
    > Brad Corradi wrote: Hello all,
    >
    > I have a red 1995 SHO that hit a parked car a few weeks back and i was 
    > curious to see what parts are interchangeable with a regular taurus. I 
    > need to replace the following parts.
    >
    > 1) Both headlights and marker lights - i don't believe these are 
    > interchangeable
    > 2) Channel Tube piece that is behind the bumper cover
    > 3) Hood
    > 4) Headlight/grill support/mounting panel - I assume this isn't 
    > interchangeable if the headlights aren't?
    >
    > Thanks for any responses,
    > Brad
    > _______________________________________________
    > Shotimes mailing list
    > Shotimes@autox.team.net
    > http://www.team.net/mailman/listinfo/shotimes
    > _______________________________________________
    > Shotimes mailing list
    > Shotimes@autox.team.net
    > http://www.team.net/mailman/listinfo/shotimes 
    _______________________________________________
    Shotimes mailing list
    Shotimes@autox.team.net
    http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes

<Prev in Thread] Current Thread [Next in Thread>