Hello,
I will be replacing my subframe bushings and possibly the subframe bushing
bolts on my 1992 SHO. Ibve seen the SHOtime FAQ writeup on bushing options,
and the specs call for M12 x 1.5 x 100mm bolts with 10.9 strength.
However, the Ford dealer has the specs as M12 x 1.75 x 112 mm bolts, so the
thread pitch differs. Most industrial fastener places have the 1.5 thread
pitch up to a maximum length of 50mm, while the 1.75s are at 110mm and 120mm.
Ibm thinking the 1.5 is a typo that should be 1.75.
Can anyone confirm the correct thread pitch?
Thanks!
Jim Koper
92
160K
________________________________________________________________________
Check out AOL.com today. Breaking news, video search, pictures, email and IM.
All on demand. Always Free.
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|