shop-talk
[Top] [All Lists]

Re: [Shop-talk] Plumbing help requested

To: "Matt" <mbarre@juno.com>,jamesf@groupwbench.org,shop-talk@autox.team.net
Subject: Re: [Shop-talk] Plumbing help requested
From: Steven Trovato <strovato@optonline.net>
Date: Sat, 12 Jun 2021 16:54:22 -0400
Authentication-results: mta4.srv.hcvlny.cv.net smtp.user=strovato; auth=pass (LOGIN) a=BtHS1wCAVwFGGf/2A35Y6w==:117 a=BtHS1wCAVwFGGf/2A35Y6w==:17 a=HpEJnUlJZJkA:10 a=kj9zAlcOel0A:10 a=n7Fs14e5AAAA:8 a=8GN4XRofAAAA:8 a=NoAKp6exAAAA:8 a=zOoktvdPAAAA:8 a=xRfjoxBpAAAA:8 a=_6GpL_ENAAAA:8 a=HRcYeAfnWI1IxxhZiJgA:9 a=CjuIK1q_8ugA:10 a=m3MdUl94G8cA:10 a=YZkXOJ8EhOMAi5z5lBNH:22 a=QZXuIX1PnW53n7rKCAoH:22 a=wUurXcvb9BuxnLFa7jaQ:22 a=GGGinmgZRQXmVEG1E52S:22 a=4plUlNce3Gdv3FjnGo9M:22
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <20210612.163206.1759.0@webmail02.vgs.untd.com>
FYI, SharkBite says that fittings used underground should be wrapped 
in silicone 
tape.  https://www.sharkbite.com/resources/blog/key-using-sharkbite-underground

-Steve

At 04:32 PM 6/12/2021, Matt wrote:
>Thanks for the quick replies.  While it is against my nature I was 
>ready to take Jim's advice and just call a plumber who would likely 
>make quick work of it but then realized I would be waiting till 
>Monday to even initiate.
>
>I had tried to attach a pic but no-go.
>
>I am gonna give it a try with shark bites and worst case I call a 
>pro Monday morning.
>
>Thanks again.
>
>
>---------- Original Message ----------
>From: Jim Franklin <jamesf@groupwbench.org>
>To: Matt <mbarre@juno.com>
>Cc: shop-talk@autox.team.net
>Subject: Re: [Shop-talk] Plumbing help requested
>Date: Sat, 12 Jun 2021 12:51:17 -0400
>
>If it's flexible enough to unsolder and resolder, I'd try that 
>first, you might get lucky, but the pipes need to be dry inside 
>first. I have cleaned and succefully soldered situations like this, 
>but I've also had stubborn joints that wouldn't solder and were a 
>multi-day headache. The Sharkbite needs a smoother surface than a 
>soldering surface, and it's not clear if you'd get that here.
>
>Depending on if you have enough time to bow the pipes dry or not, or 
>skill to solder successfully and quickly, I'd call in a pro.  They 
>can complete it before the white bread plug leaks :-)
>
>Another thought is a PEX insert that will allow the whole thing to 
>flex without cracking a joint (it's hard to tell if that was a poor 
>solder joint or it cracked). I haven't worked with it in 20 years so 
>I don't know if they still require a soldered fitting on which to 
>crimp the PEX.
>
>Actually a pro would probably just cut off and rebuild the whole U 
>sectrion in about 30 minutes since they likely have all the 
>tools/parts in the truck.
>
>jim
>
> > On Jun 12, 2021, at 12:21 PM, Matt <mbarre@juno.com> wrote:
> >
> >
> > Well, after around 4 years I finally decided that the leak in the 
> supply line to the shop is not going to "heal" of its own 
> accord.  Paid for the leakfinder to come locate it for me and 
> commenced to dig thru the concrete.  I know they have come a long 
> way with the sharkbite type fittings.  Any recommendations for a 
> high reliability repair to connect the 3/4 pvc supply to the 3/4 
> and 1/2 copper coming out of the slab?
> >
> > Access is reasonable but not perfect as it is through a hole in 
> the sidewalk and about a foot down.
> >
> >
> > 
> <ShopPlumbing1.jpeg><ShopPlumbingCloseup_LI.jpg>_______________________________________________
> >
> > Shop-talk@autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation  $12.96
> > Archive: http://www.team.net/pipermail/shop-talk 
> http://autox.team.net/archive
> >
> > Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/jamesf@groupwbench.org
> >
>_______________________________________________
>
>Shop-talk@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.96
>Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/shop-talk/strovato@optonline.net


-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive



<Prev in Thread] Current Thread [Next in Thread>