I have resorted to patience. I go into the garage use my mapp gas to get the
site boiling through and trough. I then drip marvel mystery oil on it and
walk
away when filled. I've been doing this for several days. I'll continue this
process for some more time. I'll try to weld on the remaining splinterd off
stud remnant and retry to remove eventually.----------
From: shop-talk-owner@autox.team.net on behalf of Chris Kantarjiev
Sent: Friday, March 21, 1997 12:53 AM
To: mdunst@smtplink.coh.org; shop-talk@Autox.Team.Net
Subject: Re: Broken Stud...
There are no tricks. There are some techniques. I've written about
them at length in http://triumph.cs.utah.edu/sol/tech/BrokenBolt.html - the
most important technique is patience. It *can* be done. It's
just a question of how long you're willing to mess with it. At least
you've got something sticking proud of the deck!
(Unless you put an oxy-acet torch on it, you didn't try enough heat. I
once took a month of evenings to get a stud out of a GT6 block...)
|