Re: [oletrucks] Seat Base

["jack halton" <safesix@worldnet.att.net>]

If you remove the seat riser (yes, it is welded in place) you will have a
bad case of sagging floor. It is a structural member of the cab. A friend
removed his with an air chisel before he installed bucket seats, then had to
reinforce the cab from the bottom to restore the rigidity he lost by
removing the seat riser. BTW your picture came out as garbage, at least on
my reader.

Jack / Winter Park FL


oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959