morgans
[Top] [All Lists]

Re: Rack & pinion Steering

To: NOGERA@prodigy.net
Subject: Re: Rack & pinion Steering
From: Fred_H._Birkbeck@eol.ieaust.org.au (Fred H. Birkbeck)
Date: Tue, 18 Nov 1997 22:21:36 +1100
Bob,
I fitted an MGB rack to my '51 +4 and it was hopeless.  The turning circle was
so great I had to do three-point turns on a "round-a-bout" (is this an
Australian term? - I think they are called a "circus" in England?).  The
turning circle was worse than an old Land Rover!
The MGB steering rack "throw" (the distance the rack travelled from one extent
to the other) was approximately 100mm.  My +4 requires 150mm throw to get a
decent turning circle.
The car also suffered, just slightly, from "bump-steer" as the MGB rack
steering arms are relatively short.
My next choice was an Alfa 33 rack, 150mm travel and approximately 2.8 turns
lock to lock.  The +4 now has a tight turning radius and the "long" steering
arms are pivoted from the centre of the rack - thus no noticeable bump steer. 
The Alfa rack fits neatly and works very nicely.
I wrote a short description of this modification on my "Engineer's Passion"
www. page (have a read on http://www.onthenet.com.au/~fredb/morgan01.htm).
Hope this helps.  Best regards.  Fred Birkbeck, 1951+4.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>      <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<




<Prev in Thread] Current Thread [Next in Thread>