mgs
[Top] [All Lists]

Re: [Mgs] positive ground

To: "Councill, David" <dcouncill@msubillings.edu>, "MG List"
Subject: Re: [Mgs] positive ground
From: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
Date: Mon, 20 Apr 2009 15:26:45 +0100
Only the later MGB fuel pumps were polarity conscious, but just like such
pumps - diode quenched points and pointless - can be retro-fitted to earlier
MGB then I'm guessing they could be fitted to earlier MGs with similar pumps
as well.  Waiting until you have started the engine to see what polarity it
outputs would be too late for a pointless pump, but shouldn't hurt a
diode-quenched pump.  If you know it is a points pump then disconnect the
harness from the dynamo, link the F and D terminals, start then engine and see
what polarity it generates.  But have a voltmeter between the output terminal
and ground from the outset and don't rev the engine so that it outputs more
than 20v.

PaulH.
  ----- Original Message -----


  I would check the generator with a voltmeter so see which way it is
  charging.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>