the lever moved maybe 1/4" or so when we were getting pressure, then nothing
> Oliver,
> Have you determined that the lever moves? Though it moves only 1/2
> inch or so after the clearance is taken up, if it moves then it will push
> the TO bearing.
> When you installed the gearbox, you probably would have noticed if the
> graphite of the TO bearing had worn down too close to the metal
>
> Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|