mgs
[Top] [All Lists]

Re: From disc to wire wheels-shim question

To: "Bullwinkle" <yd3@nvc.net>, <BarrMark262@aol.com>,
Subject: Re: From disc to wire wheels-shim question
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Wed, 9 Apr 2003 11:32:57 +0100
'Tis indeed.  The half-shafts should only be used with the appropriate
casing, there is nothing to be gained by using the 'other' half-shaft and
everything to be lost.  The diff and hubs can be interchanged, subject to
the previously mentioned overall width issue.

----- Original Message -----
From: "Bullwinkle" <yd3@nvc.net>
To: <BarrMark262@aol.com>; "mgs" <mgs@autox.team.net>
Sent: Wednesday, April 09, 2003 6:34 AM
Subject: Re: From disc to wire wheels-shim question


> I have no idea if the following is true of all MGBs, but it should be
> for the early "banjo" MGB as it used basically the same setup as the
> MGA.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>