> Art,
> As I recall, the limiting factor was input voltage.
> If you fed the coil with a white wire w/green tracer you gave it
> ballasted (reduced) voltage; delivering less output.
> Feeding it with a plain white wire gave it full battery voltage which
> delivered full 40K output.
>
> -Mr. Smarty Electrical Pants ;), Vince
>
Wire colour aside, can I just measure the positive terminal of the
coil? If it's 12V, I figure I'm good to go with the full 40Kv.
Scott
Scott Gardner
gardner@lwcomm.com
www.lwcomm.com/~gardner
|