Use 2 pieces of hose connected by a piece of copper or stainless pipe.
Jim Stuart
(who owns a box of cut up radiator hoses & 2' of 1.25 stainless pipe)
Larry Hoy wrote:
> Help. Anyone out there have a part number for a hose that fits?
>
> Here are the details.
>
> I have an MGB V8 radiator (outlet on the lower right side 1.25")
>
> An oil filter adapter from Dan LeGrue (sp?).
>
> A Buick 300 water pump (outlet 1.5")
>
> and a Dan LeGrue alternator bracket (hangs on the right head).
>
> Lots of stuff over on the right side.
>
> I found a universal hose that is 1.25" on one end and 1.5" on the other, 19.5"
> long. That thing will work but it rubs everywhere. I was hoping someone out
> there has found a hose for some other vehicle that is preformed which will fit
> this application.
>
> Anyone?
>
> Larry Hoy
|