mg-t
[Top] [All Lists]

Re: Re: TD Clutch Cable VS Clutch Levers

To: david.tinker@virgin.net
Subject: Re: Re: TD Clutch Cable VS Clutch Levers
From: Bob Howard <mgbob@juno.com>
Date: Wed, 3 May 2000 07:28:45 -0400
David,
  Thanks.  I wondered what this was and, duh, never made the connection.
Bob


On Tue, 2 May 2000 22:53:01 +0100 "david.tinker"
<david.tinker@virgin.net> writes:
> The stop-clutch pedal you refer to is located in the pedal box welded 
> to the
> side of the chassis . If you examine the pedal box you should see a 
> slot in
> the bottom directly beneath the clutch pedal, in which fits a stop 
> about
> 12mm dia x 20mm long with a male thread on one end for a washer and 
> nut.
> This stop prevents the clutch pedal from going back too far. It is 
> often
> left out during restorations.
> 
> Hope this helps
> 
> Regards
> 
> David Tinker
> 

<Prev in Thread] Current Thread [Next in Thread>