mg-mmm
[Top] [All Lists]

Re: J2 wiring harness

To: "Dwyer" <jasper@enternet.com.au>, "MG-MMM" <mg-mmm@autox.team.net>
Subject: Re: J2 wiring harness
From: "Patti & John Morris" <mgj2@gdinet.com>
Date: Sun, 28 Jan 2001 15:11:22 -0600
References: <001f01c08903$33cf3a60$eaa30ad2@jasperenternet.com.au>
Reply-to: "Patti & John Morris" <mgj2@gdinet.com>
Sender: owner-mg-mmm@autox.team.net
Hi Dave,

The conduit on my J2 measures  just under 1" OD (.930") and is about 28 "
long.  The exact length is hard to measure with the conduit in place. Hope
this helps.

Best Regards,

John Morris


----- Original Message -----
From: Dwyer <jasper@enternet.com.au>
To: MG-MMM <mg-mmm@autox.team.net>
Sent: Sunday, January 28, 2001 2:20 AM
Subject: J2 wiring harness


> Gentlemen
>
> On the J2 there is a piece of flex conduit fitted to the wiring loom in
front
> of the firewall on the left side low down.
>
> Does anyone have details on length and diameter for this conduit?
>
> We have two bits (one smaller dia and a little shorter than the other)
either
> of which might have been fitted to our car when we got it, and it's all
too
> long ago to remember whether I swapped them at some time.
>
> Regards
>
> Dave Dwyer
> British Cars Web: http://www.team.net/sol
> MMM list subscription info: http://www.team.net/cgi-bin/majorcool
British Cars Web: http://www.team.net/sol
MMM list subscription info: http://www.team.net/cgi-bin/majorcool

<Prev in Thread] Current Thread [Next in Thread>