land-speed
[Top] [All Lists]

Re: [Land-speed] Two stroke exhaust connections

To: <nt788@comcast.net>, Jim Dincau <jdincau@qnet.com>,
Subject: Re: [Land-speed] Two stroke exhaust connections
From: Doug Anderson <boogiewoogie12@hotmail.com>
Date: Sun, 6 Apr 2008 17:38:13 +0000
Point taken.  thanks Jack,say,..  how you then ?   - building another 'pencil'
are ya ?


   c heers to ya ,  ' Dirt  Track  Doug '
    -22 miles from Square Deal Raceway,
    -21 miles east of Action Park Speedway,
    -63 miles northeast of Champion Speedway
    -105 miles south of   'the Syracuse Mile' ...
    -262 miles north of Williams Grove Speedway
    -2225 miles due east of the Bonneville Salt Flats
              but never more than a few feet from a cold one

From: NT788@comcast.net
To: boogiewoogie12@hotmail.com; jdincau@qnet.com; land-speed@autox.team.net
Subject: Re: [Land-speed] Two stroke exhaust connections
Date: Sun, 6 Apr 2008 16:55:09 +0000


I would assemble immediately, to use rtv as an adheisive, not a gasket. jack

-------------- Original message --------------
From: Doug Anderson <boogiewoogie12@hotmail.com>

> butter up the inside of the pipe with Permatex hi-heat exhaust silicone -and
> put it together when 1/2 dry with the springs ?
>
> Maybe allow it to set-up 24-48 hrs. before start-up ? ?
>
> Ought to work ....
>
>
> c heers to ya , ' Dirt Track Doug '
> -2225 miles due east of the Bonneville Salt Flats
> but never more than a few feet from a cold one
>
> -'point man' in the perpetual search for Hot Blues,
> Cold Beer, Fast Cars, an' Warm Willin'
> Wimin'
>
>
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
> >
> > From: jdincau@qnet.com
> > To: land-speed@autox.team.net
> > Date: Sat, 5 Apr 2008 15:30:24 -0700
> > Subject: [Land-speed] Two stroke exhaust connections
> >
> > Hi all,
> > Has anyone out there had any experience building two stroke engine
> > exhaust pipes? Specifically attaching the exhaust system to the cylinder
> > barrel. The standard exhaust on the engine we are running uses a ball and
> > socket joint held together by springs at the barrel. We would like to run
a
> > more gas tight joint but are worried about stress on the barrel. Any
> > comments?
> > Jim in Palmdale
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > Land-s
peed mailing list
> >
> > You are subscribed as boogiewoogie12@hotmail.com
> >
> > http://autox.team.net/mailman/listinfo/land-speed
>
> _________________________________________________________________
> More immediate than e-mail? Get instant access with Windows Live Messenger.
>
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_
> instantaccess_042008
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as nt788@comcast.net
>
> http://autox.team.net/mailman/listinfo/land-speed

_________________________________________________________________
Going green? See the top 12 foods to eat organic.
http://green.msn.com/galleries/photos/photos.aspx?gid=164&ocid=T003MSN51N1653
A
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>